What the 100 litre buffer is
The Advance Appliances AA BFS 100 is a rectangular mild steel buffer, 420mm high, 560mm wide and 600mm deep, insulated with rigid polyurethane and finished in a case. Advance's data sheet describes it as strong enough to support a heat pump cylinder of up to 300 litres, for installations without the floor space for two tanks. It can be used in sealed systems.
Advance's ECO heat pump cylinders run from 150 to 300 litres, all within that limit.
Connections
- Four 28mm tappings: flow and return to the heat pump, and flow and return to the heating circuit. Not all heat pumps connect this way, so the installation guide says to follow the heat pump maker's instructions.
- A 1/2 inch connection at the bottom for draining.
- A 1/2 inch connection higher up for a thermostat pocket to sense temperature.
- A manual air bleed valve; purge the air with a radiator key.
The immersion heater
One 3kW immersion element is fitted behind the front panel. The replacement is the 2 1/4 inch copper immersion heater for the BFS 100, 11 inches long with a dual thermostat. For controlling an immersion on a buffer, Advance also sells an immersion control plug in stat.
Looking after it
Because the 100 litre buffer is mild steel, the installation guide stresses that inhibitor levels are particularly important. Advance's FAQ says the mild steel buffers have a long life where the system is inhibited.
- Dose inhibitor for the heating circuit plus the buffer.
- Size the expansion vessel for the expansion of the whole circuit.
- On a sealed system, fit a 3 bar relief valve and overheat protection in open circuit.
- Check inhibitor levels and expansion vessel pressure from time to time, and leave access for maintenance.
The 100 litre buffer is guaranteed for 2 years, against 25 years for Advance's stainless buffers. For why the two materials differ, see mild steel or stainless steel buffers.
- Yes. The Advance 100 litre buffer is designed to carry a cylinder of up to 300 litres on top.
- It is 420mm high, 560mm wide and 600mm deep, and can be used in sealed systems.
- It has four 28mm tappings, a drain, a thermostat pocket, an air bleed valve and a 3kW immersion.
- It is mild steel, so keeping the system inhibited is particularly important.
- It carries a 2 year guarantee.
Managing Director, Advance Appliances. 20+ Years experience