How do I choose the right type and size of cylinder?

  • General FAQ
  • 3 min read
  • Updated 7th October, 2026
answer

Start with your heat source: a thermal store for gas, oil, solid fuel or multi fuel systems, an electric thermal store for an all electric home, or a heat pump cylinder for a heat pump. Then size it on how many people, baths and showers the home has, and the sizing guide on this site recommends a capacity. If you are unsure, call the Advance team on 01543 377723.

Step 1: match the type to the heat source

Advance Appliances sorts its range by heat source on its product chooser page:

Heat source Advance product
Gas or oil boiler Thermal store, vented heating with mains pressure hot water
Electricity Electric thermal store; ECB 210 for heating and hot water; Eglow or Plug N Glow for heating only
Multi fuel, such as a wood burner or solar with a boiler SFUTS multi fuel thermal store
Heat pump Heat pump cylinder, with a buffer store if the system needs one

Two rules come from Advance's own guides. Its standard thermal stores need a heat source that reaches 75°C, so they are not designed for a heat pump alone. And if you plan to add solar thermal later, Advance's FAQ says you will need a twin coil cylinder at some point to use the solar gain.

Step 2: size it on the household

The sizing guide covers vented thermal stores, electric thermal stores, heat pump cylinders, multi fuel thermal stores and the Eglow. It asks how many people live in the property and how many showers and baths it has, then estimates the capacity. For heat pump cylinders, see the size table in what size heat pump cylinder do I need.

Size for how the home is used now. Advance's FAQ notes that more people or extra showers since the old cylinder went in may mean a larger one.

Step 3: check the house can supply it

  • Mains water: Advance's thermal store guide recommends at least 2 bar through a 22mm pipe and over 18 litres a minute; its heat pump cylinder guide suggests 1.5 bar and 20 litres a minute.
  • Electricity: an Eglow draws 30, 40 or 50 amps for the 6, 9 or 12kW, and the full house loading has to be allowed for.
  • Space: the store does not have to go where the old one stood; see where a new cylinder can go.

Step 4: ask

If you are unsure which product is right, Advance's about page invites you to call the team on 01543 377723. Its installer page offers professional advice from people with years in the business.

key takeaways
  • Start with the heat source: thermal store for gas or oil, electric thermal store for electricity, SFUTS for multi fuel, heat pump cylinder for a heat pump.
  • Advance's standard thermal stores need a heat source that reaches 75°C.
  • Size on the people, showers and baths in the home, using the sizing guide.
  • Check the mains water supply and, for electric products, the household electricity supply.
  • If unsure, call the Advance team on 01543 377723.

Reviewed by Geoff Egginton

Managing Director, Advance Appliances. 20+ Years experience