The new domestic electric boiler
from Advance Appliances.
Electric
no flues, no noise, no nox
Efficient
all the power is converted to heat
Environmentally friendly
electricity is the new green fuel
Elegant
slimline modern design
Easy to fit
2 electric connections and 2 pipes to plumb
| |
|
• Three outputs - 6,9 and 12Kw
• Fully modulating
• Underfloor heating version available
• Pump & by pass fitted
• Sealed system or open vented
• No maintenance
• Overheat & dry run protected
• Wet central heating
The boiler is available in three output versions, 6kW, 9kW and 12kW and can be specified for standard central heating circuits with an 80 degree flow or underfloor circuits with a 60 degree flow.
|
 |
|
The unit is intended for domestic central heating systems and can be connected to single phase domestic electricity supplies, please see the Technical Specification for more information.
Advance eGlow boilers are compact and quiet in operation, require no fluing and can be located anywhere within the property.
A pump is fitted in the eGlow making installation very straight forward. The pump has an over run facility and there is an automatic by pass fitted. The eGlow can be installed as a sealed system boiler or in open vented mode. A sealed system kit is available for easy installation with an 8 litre expansion vessel. This can be sited anywhere in the circuit giving the installer flexibility.
The eGlow is controlled externally with a programmer and room thermostat arrangement with voltage free switching. There is a connector in the boiler casing for this purpose. Standard central heating programmers and room thermostats can be used.
The boiler is fully modulating and soft switched on start up. This enhances the life of the heat exchangers as well as reducing the loading on domestic electricity. A single LED highlights running and fault modes.
A flow switch prevents the boiler running in dry conditions and there are two levels of overheat protection.
The Advance eGlow boiler is guaranteed for two years against faulty manufacture, subject to terms and conditions, and a technical help desk service is offered during office hours. The unit requires no maintenance in ordinary operating conditions. Stainless steel heat exchangers are fitted for long life and reliability. |
|